4 Channel Video DVR Card (BNC Connection)

Manufacturer Specifications

• Product Description: DVR card for computers
• Input: 4 Channels Video (BNC) 1 Channel Sound (3.5mm)
• Compression mode: 25fps (PAL)/30fps (NTSC), MPEG-4 compression mode (AVI)
• Resolution: 760x576 (PAL) and 640x480 (NTSC)
• Interface: PCI card slot
• Software: Windows DVR software included (or use your own software solution)
• Minimum System Requirements:
  - Windows 98/ME/2000/XP
  - Pentium III 450MHz
  - 128 MB RAM
  - Network: 10/100BASE-T
• Power Source: PCI Card Slot
• Dimensions: 120mm X 100mm x 19mm (PCI standard height)
• Alarm Control:
  1.Able to connect 16-channel normal alarm annunciator (infrared probe, vibration sensor, etc)
  2.Auto-linkage alarm recording once alarm sensor triggers
  3.Alarm recording time adjustable
  4.Provide 3-channel alarm output, able to linkage control lamplight, alarm bell and other peripherals
  5.Each channel able to set video motion detection alarm function and also able to set motion detection area at discretion
  6.Auto-linkage alarm video recording once motion detection sensor triggers
  7.Provide video signal lost and image dodge alarm
• Remote Transmission & Control:
  Perform remote image transmission through LAN, normal telephone line, ISDN and other communication modes
  Support remote video recording data playback, P/T/Z control and client alarm functions
• Audio/Video Recording & Playback:
  1.MPEG4 compression format, able to implement 1-channel~4-channel real-time recording (25F/S per channel, total resource at 25-100 frames)
  2.Image resolution at 400-line (much higher than 240-line of normal video recorder)
  3.Multi recording mode:time schedules recording, real-time recording and alarm recording
  4.Recording frame rate per channel adjustable (1/60F/S-25F/S)
  5.Alarm recording:auto-turn into real-time recording mode once alarm recording triggers
  6.Voice recording with audio and video real-time synchronous, and support scene listen-in
  7.Able to save recording data into local hard disk, or use U-disk/CD-recorder for long time storage
  8.Able to perform selective playback modes according to recording time, such as different speed playback, fast forward/fast reverse
  9.Able to capture single frame image for printing or electronic zoom in
  10.Support recording and playback real-time synchronous

Product Notes

• Please consult with an experienced technician for installation and setup of this product
• 150-200mb/hour recordings. Use pico software
• One system can support up to 4 cards
• Able to connect 16-channel normal alarm annunciator
• 3-channel alarm output
• Alarm Triggered Recording
• Motion Detection Recording
• Simultaneous playback, recording and live display
• Remote Monitoring with support for LAN and Dial Up transmission
• Fully compatible with P/T/Z control protocols of industry mainstream KALATEL, PELCO, PHILIPS, UNIVISION, ULTRAK, VICON encoders
• Easy to Expand System

Package Contents

• Model SKC-2000F
• Software/Manual/Driver CD
• Box with ESD protective bag

Frequently Asked Questions

• Can I use this with my Windows 7 or Linux computer?
  The card itself is a PCI card that will work with most computer systems. However, the included software may not be compatible with those operating systems. If you run those operating systems, the you may need to find other monitoring and recording software on the internet that is compatible with the operating system of your choice.